12 LushOne 301 – LushOne Inca
Mixer/Signal Process output voltages
•
Output of Mixer/Signal Processor is clipped to about 1V above/below the power supply voltage
•
Still, output can easily exceed the guaranteed safe input range for CVs
–
OSC1/OSC2 CV inputs are particularly sensitive because the feed the AVR Microcontroller
•
For safe operation:
1.
Connect input(s) to mixer but start with DC Out disconnected
2.
Start with very low gain
3.
Adjust the DC Offset to put the voltage in the safe range (use a meter or LEDs to assess)
4.
Make connection from DC Out to the CV in
5.
Increase the gain in small steps until you are happy. After each step adjust the DC Offset as necessary
•
Keep a short eye on the LEDs – in particular watch for the negative LED lighting up!
•
Some inputs (eg CV in to the filter) are not too sensitive about the voltage in and can be more
freely used.
0V
+8V
-8V
+5V
Guaranteed safe range for
LushOne CV inputs
(Particularly OSC1/OSC2 CV in)
Take care not to
overload CV inputs!
Range of output
voltages from
Mixer/Signal
Processor
Danger Zone!
Danger Zone!
