10 LushOne 301 – LushOne Inca
Mixer/Signal Processor – Signal level LEDs
•
LEDs light up when DC output voltage is
positive (upper LED), or
negative (lower LED)
•
LED brightness goes from dim (near 0V) to
bright (at
5V)
•
DC signals will cause steady lights
Slow AC signals will cause flickering lights
Fast AC signals will cause steady lights
again (due to persistence of vision hiding
the fast flicker)
•
With practice you will learn to infer the
signal behaviour from the pattern of the
lights
DC Out = +1V
DC Out = +5V
DC Out = -1V
DC Out = 0V
DC Out = -5V
