04
PRECAUTIONS
While the usage of electrical gadget, fundamental protection precautions should continually be
observed to reduce the risk of fire, electric surprise or harm.
n
Maintain electricity wire and controller away from moist or heated surfaces.
n
This device must no longer be used by kids. Examine and follow all instructions before the usage
of the gadget.
n
Lock the chuck earlier than the usage of the hand-piece to keep away from product malfunction.
n
Do now not touch the hand-piece connector with wet hands.
n
Make certain the hand-piece has absolutely stopped earlier than setting it down.
n
Always turn off and unplug power to the system earlier than servicing. Cleansing and protection
ought to now not be completed via children.
n
Do no longer insert any item into any openings and avoid losing the system. In case the hand- piece
is dropped, take a look at to make certain the bit is not bent and the unit does no longer overheat.
n
Never function this gadget with a broken wire or plug. If it isn't always operating well, if it's far
dropped or broken, or dropped into water, go back the system to a service center for examination
and restore.
n
Wear right shielding clothes and gadget, including a dirt mask and protection goggles. Keep the
place of job clean.
n
Do no longer disassemble or adjust the unit without authorization from Luraco technologies.
Warranty may be voided if adjustments are made without authorization.
n
Hold the region around hand-piece smooth from dust and grindings.
n
Take away dust available-piece, wiping with isopropyl alcohol and avoid beverages from
penetrating into internal components.
n
Do no longer apply oil to the product or clean with water. The grease in the bearing may want to
soften because of oil.
n
Air cleansing is acceptable but air pressure may additionally affect the hand-piece or motor.
SPECIFICATIONS
LURACO PRO-30K ELECTRIC PORTABLE DRILL
Bit size
Controller
Hand Piece
Universal voltage
12.67 cm * 7.30 cm * 2.56 cm
58 cm
Φ
2.35 mm
110V/60Hz to 240V/50HzUniversal
