Lupo Superpanel FULL COLOR 60, Руководство пользователя

Страница: 7 / 8

1. Press the « OK »
2
button to enter the main MENU.
2. Navigate through the MENU using the « »
1
or « »
3
buttons, select DEVICE
SETTINGS , press the « OK »
2
button to confirm the selection.
3. Navigate through the FAN / DISPLAY / MENU VIEW / FILTER / LINEARIZATION / CCT LIMIT
functions, use the « »
1
and « »
3
buttons to select the desired function and press
« OK »
2
to confirm the selection.
4. Within each function select the option to be activated, use the « »
1
and « »
3
buttons to select one between the options, press « OK »
2
to activate it.
Fan: Fan operation. ON / OFF.
When the fan is OFF the light intensity will be adjustable between 0 and 50%.
Display: Time during which the display backlight stays on. 30sec / 1min / ALWAYS ON .
Menu View: Type the main MENU, sub-menus and functions to show. ONLY MANUAL /
ONLY DMX / MANUAL/DMX.
Filter: It is the speed response of the system (smooth factor).
FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED.
Linearization: Linearization is the compensation curve for the human eye's perception
of the luminous intensity emitted as a function of the required power. Required power =
dimmer value on the display. LINEAR / EXPONENTIAL / LOGARITHMIC .
Linear: No compensation, the intensity of the light is directly proportional to requested
power.
Exponential: The light intensity increases from 0 to 100 exponentially.
Logarithmic: The light intensity increases from 0 to 100 logarithmically.
CCT Limit: The colour temperature is limited. 3200K - 5600K / 2800K - 10000K.
DEVICE SETTINGS
RESET DEVICE
1. Press the « OK »
2
button to enter the main MENU.
2. Select RESET DEVICE using the « »
1
or « »
3
buttons, press the « OK »
2
button to
confirm the selection.
3. Select YES with the « »
1
or « »
3
buttons, press « OK »
2
to confirm the selection.
4. The device will ask for further confirmation, select YES by pressing the « OK »
2
button.
THE DEVICE WILL RETURN TO FACTORY DEFAULT SETTINGS.
FACTORY DEFAULT SETTING
MANUAL OPERATION
MODE: CCT
DMX OPERATION
MODE: CCT
BIT: 8 BIT
DMX SIGNAL LOSS: Settings 1 MIN
DEVICE SETTINGS
FAN: ON
DISPLAY: 1 min
MENU VIEW : Manual/DMX
FILTER : Normal speed
LINEARIZATION: Linear
CCT LIMIT: 2800K - 10000K.