ATTENTION - Only to STROBE effect
1. The strobe effect is
AVAiLABLE ONLY IN MANUAL OPERATION.
2. The strobe effect is applied to the parameters of the last configured CCT/HSI/RGBW/
PRESET mode.
3. The STROBE effect is
NOT WORK
if PARTY, COPCAR, DISCO, TELEVISION, PAPARAZZI ,
LIGHTNING, EXPLOSION, FIREWORKS or FIRE effects are in functioning.
EFFECT
STROBE
TELEVISION
COPCAR
LIGHTNING
FIREWORKS
PARTY
PAPARAZZI
DISCO
EXPLOSION
FIRE
5
CCT/HUE knob
Frequency - 1 to 25 Hz
White range - 1 / 2 / 3 / 4
Flash Color - B / R / R+B / B+W / R+B+W
Color Temperature
Speed - 1 to 60
Speed - 0 to 100%
Flashing Interval - 1 to 10
Speed - 0 to 100%
Speed - 1 to 60
Speed - 1 to 3
6
GN/SAT/COLOR knob
-
Frequency - 4 to 24 Hz
Nº flashes for cycle - 1 to 4
Lightnings Interval - 1 to 20
-
-
Bulb type - 0 / 1 / 2
-
-
-
4
INTENSITY knob
Light Intensity
from 0 to 100%
E. PRESET MODE:
Mode with 53 PRESET colors, 48 factory preset and 5 user-defined preset.
1. In MANUAL OPTIONS or DMX MODE menu select
PRESET MODE
.
2. Select the PRESET to be activated with the
« »
1
o
« »
3
buttons, confirm the
selection by pressing the
« OK »
2
button.
3. In current mode, use the
« »
1
o
« »
3
button to change the PRESET in ascending or
descending order.
THE PRESET ON THE DISPLAY IS THE SELECTED PRESET.
4. Use the
« INTENSITY »
4
knob to adjust the
light intensity from 0 to 100%
.
SAVING THE SET VALUES AS A PRESET
You can store up to
5 PRESETS
.
1. In CCT / HSI / RGBW mode, press the
« »
1
and
« »
3
at the same time.
2. Save the set values in one of the available presets between
USER PRESET 1 / 2 / 3 / 4 /
5
press the
« »
1
or
« »
3
button to select the PRESET number and press
« OK »
2
to confirm the selection.
THE SET COLOR IS SAVED AS PRESET.
"BUSY"
indicates that in the user preset there are parameters memorized if you select it,
the parameters will be replaced by the new ones.
"EMPTY"
indicates that the user preset is
free.
E. SPECIAL EFFECT MODE:
Mode with 10 SPECIAL EFFECTS.
STROBE / PARTY / COPCAR /
DISCO / TELEVISION / PAPARAZZI / LIGHTNING / EXPLOSION / FIREWORKS / FIRE.
1. In MANUAL OPTIONS or DMX MODE menu select
EFFECT MODE
.
2. Select the EFFECT to be activated with the
« »
1
o
« »
3
buttons, confirm the
selection by pressing the
« OK »
2
button.
3. In current mode, use the
« »
1
o
« »
3
button to change the EFFECT in ascending or
descending order.
THE EFFECT ON THE DISPLAY IS THE SELECTED EFFECT.
4. Use the knobs
5
and
6
to adjust the effect setting values.
See table below.
Содержание Superpanel FULL COLOR 60
Страница 1: ...Superpanel FULL COLOR 60 User Manual...
