Network management
Status collection
RDM Information
Product Information
Search RDM devices
Retrieves queued messages or status
message if no message is in queue
Retrieves a list of all supported RDM
commands
Retrieves a variety of information about the
device that is normally required by a controller.
Mute RDM device, no response message
Retrieves current Warning/Error messages
Retrieves a list of all RDM commands
Text description of up to 32 characters for the
device model type.
Activate RDM device fo response message
DISC UNIQUE BRANCH
QUEUED MESAGES
SUPPORTED
PARAMETERS
DEVICE INFO
DISC MUTE
STATUS MESSAGES
PARAMETER
DESCRIPTION
DEVICE MODEL
DESCRIPTION
DISC UN MUTE
0x0001
0x0020
0x0050
0x0060
0x0002
0x0030
0x0051
0x0080
0x0003
EXPLOSION
PAPARAZZI
FIRE
FIREWORKS
LIGHTNING
0x0C
0x0E
0x0D
0x0B
0x0F
This parameter provides an ASCII text
response with the Manufacturer name for the
device. “LUPO” is the default name.
DMX mode
The identify flag (flashes the light)
0: Off 1: On
0: 30 sec 1: 1 min 2: always on
0: black out 1: last settings on 2: last settings
1 min
0: 8 bit 1: 16 bit
0: 2800-10000 1: 3200-5600
0: linear 1: exponential 2: logarithmic
0: full speed 1: normal speed 2: high speed 3:
low speed
Set the device to its factory defaults. Get:
Check if settings still in default state -> 1 if
default
Shows a description of a DMX-Mode, max 32
characters
Retrieves software version string of main
software
DMX address
MANUFACTURER
LABEL
DMX PERSONALITY
IDENTIFY DEVICE
FAN MODE
DISPLAY TIMEOUT
DMX SIGNAL LOST
MODE
DMX BITS
CCT LIMIT
LINEARIZATION
FILTER
FACTORY DEFAULTS
DMX PERSONALITY
DESCRIPTION
SOFTWARE VERSION
LABEL
DMX START ADDRESS
0x0081
0x00E0
0x1000
0x8001
0x8002
0x8003
0x8004
0x8005
0x8006
0x8007
0x0090
0x00E1
0x00C0
0x00F0
DMX512 Setup
Control
Manufacturer Commands
Lupo srl
- Via V. Sassi 28/30 Collegno (TO) - 10093 - Italy
Phone:
+39 011 411 9919 /
e-mail:
website:
www.lupo.it
