Functioning
Turn the
DIMMER
knob to
adjust the luminous intensity
level from
0
to
100%.
Turn the
COLOR
knob to set the color temperature between
tungsten light (T - 3200 K)
and
daylight (D - 5600 K)
. The
current value is shown on the display.
L
H
Lupoled 1120 DMX Dual - Color
Attivate device controls
1. Press
« ENTER »
2
button to open the menu
2. Set the functions
F1-F2-F3-F4-F5
on L or H
(view coding table). Use the
« UP »
3
button to
select H and
« DOWN »
1
button to select L.
3. Press
« ENTER »
2
button to confirm selection
and to swap between functions.
Set the channel in DMX
1. Press
« ENTER »
2
button to open the menu.
2. Set the functions
F1-F2-F3-F4-F5
on L. Use the
« DOWN »
1
button to select L for each fuction
and
« ENTER »
2
button to swap between functions and confirm the selection.
3. Once the functions have been set the display shows a channel between 1 - 512.
Use the
« UP »
3
or
« DOWN »
1
buttons to change the channel in ascending or descending
order. The channel on the display is the channel set.
4. To memorize the channel press 6 times
« ENTER »
2
button.
The Lupoled 1120 DMX Dual Color panel uses 2 channels on the console, the first channel will
control the luminous intensity and the second channel will control the color temperature. If you set
up the channel 1 on Lupoled panel, the channel 1 and channel 2 will be used on the control desk.
When you use many panels is necessary set up each panel using the odd-numbered channels
(channel 1 - 3 - 5 - 7....). in order to avoid overlapping.
Memorize settings
The Lupopoled 1120 DMX Dual - Color memorize the settings when navigating the menu without
changing settings i.e. press the ENTER button 6 times.
Coding Table
Device control
Set color temperature via knob
Set color temperature via buttons
Set luminuos intensity via knob
Set luminous intensity via buttons
Attivate DMX
Disable filter* - only in DMX
F5
L
L
H
L
L
L
F3
H
L
H
L
L
L
F4
L
L
L
L
L
H
F2
L
H
L
L
L
L
F1
L
L
L
H
L
L
Turn the
DIMMER
knob to
adjust the luminous intensity
level from
0
to
100%.
Turn the
COLOR
knob to set the color temperature between
tungsten light (T - 3200 K)
and
daylight (D - 5600 K)
. The
current value is shown on the display.
Lupoled 560 Dual - Color
* When the fixture is controlled via DMX the filter is applied on
the unit to make the control of color temperature and luminous
intensity uniform.
ATTENTION:
The display
shows 3 of the 4 digits of the
temperature color values.
Example :
320 = 3200 K.
ATTENTION:
The display
shows 3 of the 4 digits of the
temperature color values.
Example :
320 = 3200 K.
1
2
3
