Functioning
Turn the
DIMMER
knob
to adjust the luminous
intensity level from
0
to
100%.
Turn the
DIMMER
knob
to adjust the luminous
intensity level from
0
to
100%
.
Lupoled 350 model
Lupoled 560 model
Lupoled 560 DMX model
L
H
ATTENTION:
The display
shows 3 of the 4 digits of the
temperature color values.
Example :
320 = 3200 K.
Attivate device controls
1. Press
« ENTER »
2
button to open the menu.
2. Set the functions
F1-F2-F3-F4
on L or H (view
coding table). Use the
« UP »
3
button to select
H and
« DOWN »
1
button to select L.
3. Press
« ENTER »
2
button to confirm selection
and to swap between functions.
Set the channel in DMX
1. Press
« ENTER »
2
button to open the menu.
2. Set the functions
F1-F2-F3-F4
on L. Use the
« DOWN »
1
button to select L for each fuction and
« ENTER »
2
button to swap between functions and confirm the selection.
3. Once the functions have been set the display shows a channel between 1 - 512.
Use the
« UP »
3
or
« DOWN »
1
buttons to change the channel in ascending or descending
order. The channel on the display is the channel set.
4. To memorize the channel press 5 times
« ENTER »
2
button.
Memorize settings
The Lupopoled 1120 DMX Dual - Color memorize the settings when navigating the menu without
changing settings i.e. press the ENTER button 6 times.
Coding Table
Device control
Set luminous intensity via buttons
Attivate DMX
Disable filter - only in DMX
F3
L
L
L
F4
L
L
L
F2
L
L
H
F1
H
XLR 3 pin / 5 pin
RJ 45
1
7
2
2
3
1
L
L
1
2
3
* When the fixture is controlled via DMX the filter
is applied on the unit to make the control of color
temperature and luminous intensity uniform.
