Lupine SL F, Руководство пользователя

Страница: 8 / 11

As shown in the picture down below, the wire remote should be mounted right
next to the handle. Then attach the screw with the enclosed Torx 6.
The remote lights green
 Low beam is activated.
The remote doesn‘t light

The lamp is switched off or
daytime running light is activated.
The remote lights blue

High beam is activated.
Wire remote
Operation
Light settings:
The brightness sensor is activated, it automatically switches between daytime
running light and low beam.
Mode
Brightness sensor
The sensor is activated.
Comment
When low beam is activated, it‘s possible to
change into high beam by pushing the wire
remote.
Turn on:
1. Activate the light at the display.
2. Turn it on by pushing the button of the wire remote or the lamphead.