Deutsch
English
24
25
Blika
Blika
Programming
1x red
Release the button, SOS activated
1x blue
2x blue
3x blue
4x blue
5x blue
1x red
on / off
2x red
on / off
3x red
on / off
4x red
on / off
Available adjustments
Press the top button
until it lights
2 - step
3 - step
3 - step
4 - step
3 - step
Red
Green
White
Diffus
Light Settings
Extra Settings
5x red
6x red
7x red
8x red
9x red
10x red
11x red
12x red
Start with highest beam (Default)
/ lowest beam
Early "battery low warning" (Default)
Late "battery low warning"
Alpine SOS
/ SOS (Default)
Doubleclick on /
off (Default)
Stealth on /
off (Default)
The LEDs of the lower button get cut in the top button /
The LEDs of both buttons work independently (Default)
Reset
Default setting
Programming:
For this purpose, simply press and hold the lampheads button until it turns blue, red or green as shown
in the table on the right side. If the finger is removed from the button, the mode is selected.
To get into
4-step mode
, hold the button until the blue LED flashed 4 times, then release the button.
Example:
Adjusting the brightness of the lower button LEDs:
The brightness of the spot, diffuse, red and green light can be adjusted in 5 steps through the
lower button.
Switch on the
wanted LED
Release as soon as
the desired level is
reached
The Output is
increased in 5
steps
Press and hold the
lower button
