30 Betty TL
31
Betty TL
En
gl
is
h
6
6
2
1
Simply use an Allen key to quickly attach the
handlebar mount to the flashlight.
Important:
Always make sure to place the
included o-ring between flashlight and handlebar
mount.
30°
30°
Special Mount
(only Betty TL S)
Holster:
Betty TL S: Leather holster with magnetic latch. Art. No. 307
Betty TL: Cordura holster with velcro fastener Art. No. 301*
Have a look at:
www.lupine.de
*without figure
To adjust the lamp to freeride or downhill handle-
bars, you may rotate the handlebar mount by
30°
to either side. Always ensure to loosen the handle-
bar mount screw if you want to rotate the lamp.
For particularly thick handlebars, it is recommended
to use the included larger o-ring.
Note:
Upon delivery, the ring for standard hand-
lebars is attached to the handlebar mount. To be
able to mount the lamp to oversized handlebars,
replace the o-ring with the larger one.
If our Betty flashlight is combined with a
short
2.5 Ah battery tank (Betty TL S)
, it is possible to
mount the light on a handlebar or other round
objects by help of our special mount Art.No. 787.
Have a look at:
www.lupine.de
Use the flexible rubber ring to quickly and easily
mount the lamp to all thinner handlebars or
other similarly shaped objects.
Opening the holster:
Attaching the holster:
The holster may be adjusted to three
different belt widths. Open the push
button and insert the strap into the
respective loop.
To open the holster, pull the magnetic
latch
up (not to the side or away from
the body).
Accessoires