Lunos Gesture Control 5/GS, Руководство по установке

Страница: 10 / 32

10
With analogue control:
DIP switch 3 ON: Enable analogue output 1 (T2)
DIP switch 4 ON: Enable analogue output 2 (R2)
Set DIP switch "D/A" to "A".
With digital and analogue control:
Connect the device to be operated via analogue control only to R2!
DIP switch 4 ON: Enable analogue output 2 (R2)
Set DIP switch "D/A" to "A".
If only one device to be digitally controlled is connected:
Connect the device to be digitally controlled to T1 and R1!
Set DIP switch "D/A" to "D".
If only one device to be operated via analogue control is connected:
Connect the device to be operated via analogue control to T2!
DIP switch 3 ON: Enable analogue output 1 (T2)
Set DIP switch "D/A" to "A".
Universal control 5/UNI-FT

digital control from V4.11 onwards

analogue control - also older models (no summer ventilation)
Ne
xx
t series

digital control from firmware 0.98 onwards

analogue control from firmware 0.98 onwards (provided at www.lunos.de)
Silvento ec

from the board version onwards (basic, comfort etc.) V5.0
EN
Compatibility