2
4
Page 2 of 3
Passenger side front
1
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Mounting bracket
Position front bracket in place (location 1 above) and
reinstall body mount bolt. Repeat for mid and rear
brackets (location 2 and 3 above). Do not fully tighten
at this time.
Beginning at the passenger side front (location 1 above), remove
the body mount bolt.
Repeat at locations 2 and 3 shown above.
Identify the (3) mounting points for each bracket by looking under the passenger side of the vehicle and finding the three (3) locations
where the vehicle body is mounted to the frame.
Position nerf board alongside vehicle. Begining with the passenger side front (location 1 above) align the two holes in nerf
board with the corresponding two holes in bracket. Loosely attach nerf board to brackets using (2) bolts, (2) lock washers,
and (2) flat washers. Do not fully tighten at this time.
Repeat for remaining mounting locations (location 2 and 3 above).
3