DALI Display, Manual V1.0.6
© 2016, Lunatone Industrielle Elektronik GmbH
Remove Address:
A ballast can be deleted from a group by selecting the device in the group list
box and then "Delete Address". Note that only the group settings of the
device will be deleted - not the device address itself.
Add Address:
An address can be added to a group either by drag&drop action or by using
the “Add to Group” button
Note
The group information will be stored into the ballasts on the DALI bus only
after the "Save" icon has been pressed.
To change the actual group, tap the "load" symbol.
Note
Addresses on DALI A range from A0…63 (or A1…A64) and
Addresses on DALI B range from B0…B63 (or B1…B64)
