DALI Daylight Manual
[5]
© 2018, Lunatone Industrielle Elektronik GmbH
2.1.
General settings
The configuration page of the DALI Daylight module is divided into tabs, one for each
functionality.
The header of the page contains general information about the device (manufacturer, article
name, article number, serial number and firmware version).
“Enable PIN”:
Activate the access protection with a 4-digit pin code. If this is activated, you will be
asked to enter this PIN the first time you use the app on a mobile device.
“Enable Proximity”:
function has to be enabled in the DALI Daylight module (DALI cockpit
settings) as well as in the App on a mobile device: in the event the mobile device enters the
Bluetooth reception area, the light can be automatically switched on and off after a certain hold
time.
Note:
The proximity feature is only supported on mobile devices with iOS operating system.
2.2.
Device settings
In each tab (Luminaries, DALI CDCs, DALI RTC Timers, Motion Detectors) 5 devices can be added,
these devices can be operated/partially configured in the app. The numbers 1-5 correlate with the
app.
Each tab also has a Sync button, which will read the settings from the specified devices and display
them in the app. If no sync is performed, default values will be displayed the first time the app is
opened.
figure 2: Configuration tab “General"
