DALI Daylight Manual
[12]
© 2018, Lunatone Industrielle Elektronik GmbH
3.3.
Color Auto
The control page "Color Auto" is used to control the
color curve of up to 5 DALI CDC modules. The color
gradient is defined in the app by 3 parameters each
with color temperature and the associated time.
Using these 3 parameters a daylight curve is being
calculated and executed accordingly. After the color
temperature has run through to the “end time”, the
final color temperature is maintained until the “start
time” has been reached again.
Using the toggle switch on the right top of each section,
the color curves can be activated and deactivated.
Note:
By changing the color curve in the Daylight app the
parameters in the respective CDC are adjusted and
existing color curves are overwritten.
3.4.
Time Auto
The control page "Time Auto"is used to control up to 5
DALI RTC modules.
For each of the DALI RTC modules, two intervals can be
set for each of the 7 days of the week.
By clicking on the day (figure 10) you can activate or
deactivate the intervals, set start time, end time and
brightness value. At “start time” the defined brightness
is automatically set and held until the“end time” (DALI
command: DAP 0%).
figure 10: control page “Color Auto"
figure 11: control page “Time Auto"
