2
3
ADJUST
Button :
Push this button to decrease the
o
o
indoor temperature setting in 1 C increments to 17 C.
RESET Button:
Once the recessed RESET button is
pressed, all of the current settings will be cancelled
and the controller will return to the initial settings.
NOTE:
Heat mode is for reverse cycle models only.
1
6
ADJUST
Button :
Push this button to increase the
o
o
indoor temperature setting in 1 C increments to 30 C.
2
7
MODE Button:
Each time the button is pressed, the
operation mode is selected in the sequence of the
following:
3
AUTO
COOL
DRY
HEAT
FAN
5
4
AIR VERTICAL Button:
When press the button once
and quickly, the air flow direction setting feature of
the louver is activated. The moving angle of the
o
louver is 6 for each press. Keep pressing the button
to move the louver to the desired position. If keep
pressing the button without releasing for 2 more
seconds, the auto swing feature of the louver is
activated. The vertical louver would swing left and
right automatically. Press it again to stop.(If the indoor
unit has no this feature, there is no corresponding
operation happened when press this button.)
NOTE:
If the vertical louver auto swing feature has
been set by unit control panel, press the AIR
VERTICAL button on remote controller will cancel
the feature.
Model
Rated Voltage
R51I3/BGE-M,R51I3/BGCE-M
-5 C 60 C
8m
3.0V(Dry batteries R03/LR03
2)
Remote Controller Specification
Performance Features
Features of Remote controller buttons
1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling
only model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range: 17 C~30 C.
4. Full function of LCD (Liquid Crystal Display)
ADJUST
AUTO
COOL
DRY
HEAT
FAN
HIGH
LOW
MODE
FAN SPEED
AIR
VERTICAL
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
1
2
4
5
6
3
8
7
9
10
11
12
13
Environment
SET TEMPERATURE( C)
LED
DISPLAY
14
Signal Receiving
Range
TURBO
AIR
HORIZONTAL
AIR HORIZONTAL Button:
When press the button
once and quickly, the air flow direction setting feature
of the louver is activated. The moving angle of the
o
louver is 6 for each press. Keep pressing the button
to move the louver to the desired position. If keep
pressing the button without releasing for 2 more
seconds, the auto swing feature of thelouver is
activated. The horizontal louver would swing up/down
automatically. Press it again to stop.
LED DISPLAY Button:
Press this button to clear the
display on the indoor unit, press it again to light the
display .
~
8
ON/OFF Button:
Press this button to start the indoor
unit. Press again to stop the unit.
www.lunariaklima.it
www.lunariaklima.it
