8-32
•
[V] Vehicle battery voltage gauge. This
gauge shows the voltage of the Vehicle
battery in bar format, with the precise
reading shown at the top of the bar. The
actual bar changes colour according to
the battery voltage. Less than 10.9V =
red (Poor), 10.9V to 11.8V = yellow
(Fair), 11.9V to 14.4V = green (Good).
•
[L] Leisure battery voltage gauge. This
gauge shows the voltage of the Leisure
battery in bar format, with the precise
reading shown at the top of the bar. The
actual bar changes colour according to
the battery voltage. Less than 10.9V =
red (Poor), 10.9V to 11.8V = yellow
(Fair), 11.9V to 14.4V = green (Good).
•
[F] Fresh water level gauge. This gauge
shows the level of water in the Fresh
water tank, with the reading also shown
at the top of the bar. The actual bar
changes colour according to the water
level. 25% = red, 50% = yellow, 75% and
above = green.
•
[W] Waste water level gauge. This
gauge shows the level of water in the
Waste water tank, with the reading also
shown at the top of the bar. The actual
bar changes colour according to the
water level. 25% = green, 50% = yellow,
75% and above = red.
SERVICES
4.4.3
Active Battery Screen
This screen is automatically selected when
the battery select button is operated. The
battery symbol bottom left will contain a ‘L’ if
the leisure battery is selected and a ‘V’ if the
vehicle battery is selected. From left to right;
•
[L or V] Active battery voltage gauge.
This gauge shows the voltage of the
Active battery (the currently selected
battery) in bar format, with the precise
reading shown at the top of the bar. The
actual bar changes colour according to
the battery voltage. Less than 10.9V = red
(Poor), 10.9V to 11.8V = yellow (Fair),
11.9V to 14.4V = green (Good).
•
[AH] Leisure battery calculated capacity
(percentage of Amp Hours). When the
leisure battery is active (selected), this
gauge will be shown. The gauge shows
the predicted charge capacity of the
battery. As the battery is charged this
gauge will increase, as the battery is
discharged (used) this gauge will
reduce. This can provide a useful
indication of usable battery power.
•
[SUN] Solar panel ammeter. This gauge
shows the current in Amps that is being
provided by the solar panel (when fitted).
The system will decide which battery to
direct the solar power to. This is based
on system logic (see section 3.6) and is
indicated by a ‘L’ or ‘V’ in the centre of
the sun logo.
•
[A] Battery ammeter. This gauge shows
the current in Amps going into or out of
the Active (selected) battery. Positive
current (+) indicates charging of the
battery, and is indicated by a green bar.
Negative current (-) indicated
discharging of the battery, and is
indicated by a yellow bar (low discharge)
or red bar (high discharge).
Содержание Landstar 2017
