Luna OBR 6225, Руководство пользователя

Страница: 14 / 32

Luna 6225
DOC000015_OBR 6225
User’s Guide Rev001
Page 13
Turn Event Table Display On/Off
Event Table is displayed by default after you first open the application. Yet you have the option of
not showing the Event Table (giving its display estate to the Delay Plot so that the plot can be shown
on a larger area)
, which can be achieved by uncheck the “ Events ” view control in Settings and Tools
(please refer to “ 4.4.2.1 Measurement Tab ”) . You can turn the Event Table display back on, by
checking the “ Events ” view control in Settings and Tools .
Event Marks in the Delay Plot
You can check/enable the " Show Event Markers in Plot " checkbox to show vertical markers on all
event locations.
Figure 8 “Show Event Markers in Plot” enabled , showing vertical markers on all event locations.