Luna MDM 250, Оригинальное руководство пользователя, Страница: 23 / 56

19
ENGLISH
CONTENTS
Operator.......................................................................................19
Before operations ........................................................................19
Operation.....................................................................................19
Grounding instrictions.................................................................19
Specification................................................................................19
Unpacking & Preparing for Use .................................................19
Feature.........................................................................................20
Installation...................................................................................20
Mounting the machine ................................................................20
Operating steps............................................................................21
Packing list ..................................................................................21
Flow chart ...................................................................................22
Circle drawing.............................................................................40
Parts list.......................................................................................42
EU Declaration of conformity ....................................................47
PLEASE READ THIS MANUAL
THOROUGHLY AND FOLLOW ALL
DIRECTIONS CAREFULLY
IMPORTANT SAFETY INSTRUCTION
READ ALL INSTRUCTIONS AND WARNINGS BEFORE
USING THIS TOOL
OPERATOR
COMMON SENSE AND CAUTION ARE FACTORS WHICH
CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS
MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEM-
BER:
1. When using electric tools, machines or equipment, basic safe-
ty precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury.
2. Keep work area clean. Cluttered areas invite injuries.
3. Consider work area conditions. Do not use machines or power
tools in damp, wet, or poorly lit locations. Do not expose
equipment to rain, keep work area well lit. Do not use tools in
the presence of flam-mable gases or liquids.
4. Keep children away, all children should be kept away from the
work area.
5. Guard against electric shock. Prevent body contact with
grounded surfaces such as pipes, radiators, ranges, and refri-
gerator enclosures.
6. Stay alert. Never operate if you are tired.
7. Do not operate the product if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if
your judgment or reflexes might be impaired.
8. Do not wear loose clothing or jewelry as they can be caught in
moving parts.
9. Wear restrictive hair covering to contain long hair.
10. Use eye and ear protection. Always wear.
11. Keep proper footing and balance at all times.
12. Do not reach over or across running machines.
Before operations
1. Be sure the switch is OFF when not in use and before plug-
ging in.
2. Do not attempt to use inappropriate attachments in an attempt
to exceed the tool”s capacity. Approved accessories are avai-
lable from the dealer or machine maker.
3. Check for damaged parts, before using any tool, any part that
appears damaged should be carefully checked to determine
that it will operate properly and perform its intended function.
4. Check for alignment and binding of all moving parts, broken
parts or mounting fixtures and any other condition that may
affect proper operation. Any part that is damaged should be
prop early repaired or replaced by a qualified technician.
5. Do not use the tool if any switch does not turn off and properly
OPERATION
1. Never force the tool or attachment to do the work of a larger
industrial tool. It is designed to do the job better and more
safely at the rate for which it was intended.
2. Do not carry the tool by its power cord.
3. Always unplug the cord by the plug. Never yank the cord out
of the wall.
4. Always turn off the machine before unplugging.
IF THERE IS ANY QUESTION ABOUT A CONDITION
BEING SAFE OR UNSAFE, DO NOT OPERATE THE TOOL!
GROUNDING INSTRUCTIONS
This machine has a three-prong plug, the third prong is the ground.
Plug this cord only into a three-prong receptacle. Do not attempt to
defeat the protection the ground wire provides by cutting off the
round prong. Cutting off the ground will result in a safety hazard
and void the warranty.
DO NOT MODIFY THE PLUG IN ANY WAY. IF YOU HAVE
ANY DOUBT, CALL A QUALIFIED ELECTRICIAN.
SPECIFICATION
Artnr.................................................. 20865 -0101
Luna ............................................................ MDM 250
Max. drilling capacity ..........................mm 25
Max. tapping capacity ..........................mm 12
End mill capacity................................. mm 25
Face mill capacity ................................mm 50
Spindle stroke.......................................mm 70
Throat ...................................................mm 230
Max. distance spindle to table..............mm 350
Spindle taper............................................... MT#3 or R8
Spindle speed .......................................rpm 100-1750 ±10 %
Table effective size...............................mm 550 x 160
T-slot size .............................................mm 12
Table cross travel..................................mm 160
Table longitudinal travel ......................mm 300
Motor output power ................................W 1000
Overall dimension (LxWxH) ...............mm 685 x 560 x 830
Weight ( Net/Gross)................................kg 165 / 198
Packing size (LxWxH).........................mm 840 x 820 x 1040
UNPACKING & PREPARING FOR USE
Before unpacking you must check the package carefully, to find
whether it is damaged and any may have effect on the machine,
please connect with the distributor in advance. Unpacking care-
fully, check the species of standard accessories and the quantity to
find whether it is as same as the packing list in the package.
Original instructions