Luna BWL 406, Руководство пользователя

Страница: 44 / 116

Knockout Bar
The knockout bar is used to remove the spur center from the head-
stock spindle. Insert knockout bar into hole at opposite side from
spur center. (See Fig.4)
Attaching Live Center On the Tailstock
Insert the live center, with a No. 2 Morse Taper shank into the tail-
stock spindle. (See Fig.5)
To remove the live center from the tailstock spindle, loosen locking
arm and rotate the hand wheel counter clockwise to retract spindle
into the body of the tailstock. The live center will be pushed out of
the spindle. (See Fig.6)
42
Fig. 04
Knockout bar
Fig. 05
Live center
Locking arm
Tailstock spindle
Installing The Faceplate to the Headstock
Thread the faceplate clockwise on to the headstock spindle. Engage
the spindle lock and stop the spindle from turning. Tighten the face-
plate with the supplied wrench. (See Fig.7)
Warning! Disengage spindle lock before turning the machine on.
Installing Tool Holder On the Lathe Bed
Located the tool holder from the carton, and install it onto the lathe
bed with two pan head screws. (See Fig.8)
Secure Lathe to a Solid Work Surface
The lathe must be attached to a solid work surface or stand. Four
mounting holes are easily accessible at the base of the lathe. (See
Fig.9)
Fig. 06
Locking arm
Fig. 07
Spindle lock
Faceplate
Fig. 08
Tool holder
Pan head screw
Fig. 09
Mounting holes