![Luna 20550-0200 Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/luna/20550-0200/20550-0200_original-instructions-manual_1949840025.webp)
23
GROUNDING
1. In the event of a malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of
electric shock. This tool is equipped with an electric cord having
an equipment grounding conductor and a grounding plug. The
plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
2. Do not modify the plug provided, it will not fit the outlet, and
have the proper outlet installed by a qualified electrician.
3. Improper connection of the equipment grounding conductor can
result in a risk of electric shock. The conductor with insulation
having an outer surface that is green with or without yellow
strips is the equipment grounding conductor. If repair or repla-
cement of the electric cord or plug is necessary, do not connect
the equipment grounding conductor to a live terminal.
4. Check with a qualified electrician or serviceman if the groun-
ding instructions are not completely understood, or if in doubt
as to whether the tool is properly grounded.
5. Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the tool’s plug.
6. Repair or replace damaged or worm core immediately.
7. This tool is intended for use on a circuit. The tool has a groun-
ding plug.
NOTE:
The type of electrical plug and receptacle differs from
country to country.
WARNING:
In most European countries only the grounding
acceptable. The extension cords should be VDE certified or
something better.
Safety
Fire hazards
Warning! Danger of fire! .L1.l Incorrect installation and usage
could result in a fire.
• The dust extraction hoses must be electrically
conduc
tive and
grounded to prevent electrastatic build up.
• The vacuum hoses/pipes must be flameproof.
• Earth vacuum hose/pipes against any static electricity that may
accumulate.
• All electrical connections must be installed correctly by a
qualified person.
• Electricity suppiy only in authorized field of ± 10% of network.
• Only vacuum sawdust and woodshavings.
• Da not vacuum spark•generating objects (e.g. nails, screws etc.).
• Do not vacuum any inflammable waste. (e.g. cigarette ends,
flying sparks, etc.)
Procedure in case of fire
1. Pull out the mains plug.
2. Stop the pneumatic supply.
3. Call the fire•brigade.
Attention! When moving the chip container, flash fire can occur!
Fig. 14: Procedure in case of fire
The dust collector is now ready to be placed into service. Before
connecting to a power source, be sure the power source is proper-
ly grounded and is of proper voltage and amperage.
Fig 14
Содержание 20550-0200
