Luna 20252-0094, Оригинальное руководство пользователя

Страница: 7 / 16

5
ENGLISH
Original instructions
Safety rules:
1. This instruction manual carries important information. If unreadable or missing, contact LUNA for a replacement.
2. Always wear goggles.
3. Maintain a safe working environment. Keep the work area tight. Make sure there is sufficient workspace. Always
keep the work area free of obstructions, grease, oil, trash and other debris. Do not use a power tool in areas near
flammable chemicals, dusts, and vapors.
4. Do not touch the power switch with wet hands and never plug the power cord of the power tools to be used on this
stand into an electrical outlet while standing on wet or damp surface.
5. Do not allow children to operate or play with this product.
6. WARNING! The warnings and cautions in this manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are key factors which cannot be
built into this product, but must be aware by the operator.
Instructions:
1. Folding legs
With the stand laying flat, unfold the legs by pressing the push button to release, make sure the button locks in the
second position, and do the same for all four legs.
2. Saw mounting clamps
The clamps are designed to mount the saw on the stand.
The saw should be attached to the clamps both in front and back. If the holes do not line up, a plywood base might
be necessary. Attach the saw to the plywood base and attach the plywood to the clamps. To lock the clamps onto the
stand, press the handle to the down position, and lift it up to unlock.
3. Extension beam
Slide the beam to a desired length and lock in place with beam lock lever on each side. Adjust the height of the
roller even with the saw table.