3
REVERSE FUNCTION
If the meat gets stuck in the feeder screw during operation, use the reverse function to release the jam.
1.
Switch off the unit by switch the ON/O/R button to O position, wait until the motor stops completely. Then switch and hold down the
switch ON/O/R button to R positon for 5-10 seconds.
2.
The feed screw starts rotating in the opposite direction and push out jammed food.
3.
If this does not help, unplug the unit from the outlet, dissemble and clean it.
CLEANING AND MAINTENANCE
•
Switch off the appliance and make sure that the motor has stopped completely.
•
Unplug the appliance.
•
Disassemble by reversing the assembling steps (fig.8).
•
Press locking button and turn the whole grinder head in the direction of the arrow.
Remove the pusher and tray (fig.9).
•
Clean all the attachments and parts right after use.
•
Do not immerse motor unit, plug and power cord in water or keep in running water.
Wipe the motor unit with a damp cloth.
•
Wash all the parts that have come in contact with meat in warm soapy water.
•
Do not use abrasives, chlorine containing substances or organic solvents.
•
The metal parts of the meat grinder are not to be washed in the dishwasher!
•
Do not wash all metal parts with hot water which temperature above 40
℃
. Because it will accelerate metal parts oxidation.
•
After washing please use dry cloth to wipe the metal parts.
•
Wipe all the cutting parts (cutting knife, cutting plates) with vegetable oil.
•
If the meat grinder won't be used for a long time, please wipe all the metal parts by vegetable oil-wet dishcloth.
CAUTION:
The blades are sharp and therefore dangerous. Handle with care.
STORAGE
•
Switch off and unplug the appliance; let it entirely cool.
•
Complete all requirements of Chapter CLEANING AND MAINTENANCE.
•
Keep the appliance in a dry cool place.
SPECIFICATION
Power supply
Mincing speed
Maximum
power
Net / Gross
weight
Gift box dimension (L x W x
H)
230 V, 50 Hz
up to 1,5 kg/min
2000 W
2,3 kg / 2,7 kg
270 mm
х 215
mm
х
230 mm
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device
production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the
model without notice. Please check when purchasing device.
