•
Before plugging in, ensure the appliance is switched off.
•
Do not immerse motor unit into water.
ASSEMBLING
1. Place the mincing tube onto the opening of the motor housing. Holding the mincing tube with one hand place the locking knob into the hole on the side of the
motor housing and tighten it clockwise.
2. Place the feed screw into the mincing tube, long end first, by turning the feed screw slightly until it is set into the motor housing.
3. Place the cutting blade onto the feed screw shaft with the blade facing the front as illustrated. If it is not fitted properly meat will not be ground.
4. Place the desired cutting plate next to the cutting blade, fitting protrusions in the slots.
4
