Rem ove the boit of the downrod.
Replace the hangar ball
at its normal position.
lnsert on the downrod the
canopy
(
B
)
and decorative
cover
(D)
Carefully feed motor
wires throught the downrod
assembly.
Re
-
insert the boit of
the hangar ball.
Change downrod
(Optional)
1. Loosen the hangar
ball from downrod by
removing set screws.
2. Slide downrod ball
off of downrod and
3. Reinstall the boit in
to another downrod,
and slide downrod ball
up to the top of the
downrod.
4. Re-install set screw
to the secure ball to
downrod.
1
I
nsert the bottom of the downrod in the motor slot.
2.
I
nsert the safety bolt and secure it with the R type pin.
3. Tighten the head screws to secure the downrod.
4. Hang the assembled motor fan by inserting the hanger ball into the
bracket.
EB
Phillips
screwdriver
6
2
3
1
B
C
