LumiraDx Instrument, Руководство пользователя

Страница: 31 / 76

Sample covering Sample
Application Area
Sample application using a transfer tube
Hold the filled transfer tube vertically over the Sample Application Area of the inserted
Test Strip and squeeze the bulb to dispense a sample of one drop. This should be
enough to fill the Sample Application Area.
Blood will then be drawn by capillary action into the Test Strip.
When the sample is detected the Instrument will sound and a confirmation message will
be displayed.
Dispose of the transfer tube safely in accordance with local regulations and procedures.
3.5 Sample application using other sample types
Refer to LumiraDx Test Strip Product Inserts for information on procedures to transfer other
sample types to the Sample Application Area of the Test Strip. Use the recommended
transfer procedure to dispense a small sample of one drop onto the circular Sample
Application Area on top of the inserted Test Strip.
3.6 Quality Control solution application
Refer to LumiraDx Quality Control Pack Inserts for information on testing with LumiraDx
Quality Controls.
Preparation for Testing - 29
Sample application using a
transfer tube