Confidential © Luminus Devices, Inc. - All Rights Reserved
Page 6
Evaluation Kit Manual - Revision A
Figure 8: Driver card pin layout (example of PT120/CBT120 driver card)
4. Use Instructions
A. PhlatLight™ Device Mounting Instructions
For precautions for ESD and guidelines for device window clean-
liness, refer to Appendix B and C respectively.
Careful application of the thermal interface material (eGraf ther-
mal pad) is required to minimize thermal resistance. The follow-
ing procedure describes recommended steps for mounting of
PhlatLight™ devices on heat sink.
1. Use a thermal pad of an area slightly larger than the area of
the core board (Figure 9).
Figure 9: Thermal pad and device
