Page 2 of 2
Teava
- Installation Instructions
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Model:
TEA-
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
E472444
REV0.6 02142019
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT.
3. 24 VOLTS DC.
4. SUITABLE FOR DAMP LOCATIONS.
5. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
mounting
bracket
power wires
to power supply
fixture support included
with any fixture over 72”
5.1
5.1
While holding the fixture, run
the power feed wires through
the mounting bracket.
Slide
each fixture arm completely into
its mounting bracket and secure
by tightening the set screw.
5.2
Thread covers completely onto
the mounting brackets.
5
cover
6.1
C24 VDC red wire from
the fixture to the power 24
VDC red wire with a wire nut.
Connect -24VDC black wire from the
fixture to power supply -24VDC
black wire with a wire nut.
6
class II
power
supply
24 VDC
120 VAC
+2
4 VDC RED
-2
4 VDC BL
A
CK
-2
4 VDC BL
A
CK
+2
4 VDC RED
6.1
to fixture
5.2
power wires
to power supply
5.1
fixture arm
