Luminex GigaSwitch 8, Руководство пользователя

Страница: 16 / 17

Technical specifications
Copper RJ45 Ports: (10/100BaseT or 10/100/1000BaseT)
Connectors Shielded Neutrik Ethercon
Protocol CSMA/CD
Ethernet compliancy IEEE 802.3, 802.3u, 802.3x Flow control & 802.3ab
Gigabit Ethernet
Auto-crossover RJ45 MDI/MDIX (allows you to use straight or cross
wired cables)
Auto-negotiating 10BaseT,100BaseTX, 1000BaseT
Auto-sensing Full or half duplex (Gigabit is full duplex)
Cable requirements Twisted pair (Cat. 5e or better)
Max. cable distance 100 meters
General:
Operation Intelligent store & forward, non-blocking
Mac address table 4096 entries
Memory 4Kb EEPROM, packet buffer size: 192KB
Switching Throughput 16 Gbps for full-wire speed on all ports
Latency 100Mb Latency: <3.6µs (LIFO 64-bytes
packets); 1000Mb Latency: <1.2µs (LIFO 64-
bytes packets)
Throughput Up to 11.9 millions pps (64 bytes packets)
Address learning Automatic
Address aging Self learnig, auto-aging
Environmental
Input power (typical with all
ports active) (Max. 20 W)
Max. 20W
Input voltage 90 - 260 VAC / (120-370 VDC)
Frequency 47 - 63 Hz
Fuse 125V-250V, 1A, Slow blow (5mm x 20mm)
Operating temperature range 0 to +40 °C
Storage temperature range -10 to +70 °C
Humidity (non-condensing) 15 to 95% RH
Dimensions (L x W x H): Rack
Version
482 x 172 x 44 (mm)
19” x 6,8” x 1,75”
Package: 520 x 235 x 50 (mm)
Dimensions (L x W x H):
Truss Version
279 x 169,5 x 102 (mm)
11” x 6,7” x 4”
Package: 340 x 230 x 110 (mm)
Weight: Rack version
Weight: Truss version
2,5kg
3,6kg
Page 16 of 17 GigaSwitch 8