Luminex GigaSwitch 8, Руководство пользователя

Страница: 15 / 17

Notes for wiring diagrams above:
➢
For patch cables, 568-B wiring is by far, the most common method.
➢
There is no difference in connectivity between 568B and 568A
cables. Either wiring should work fine on any system.
➢
For a straight through cable, wire both ends identical.
➢
For a crossover cable, wire one end 568A and the other end 568B.
➢
Do not confuse pair numbers with pin numbers. A pair number is
used for reference only (eg: 10BaseT Ethernet uses pairs 2 & 3).
The pin numbers indicate actual physical locations on the plug and
jack.
The maximum cable length for 10/100BaseT is typically 100 meters (328
ft.). Luminex recommend using 80 meters.
GigaSwitch 8 Page 15 of 17