manualshive.com logo in svg

Luminex GigaCore 12, Руководство пользователя, Страница: 37 / 42

Поделиться
Скачать
Luminex GigaCore 12 Скачать руководство пользователя страница 37

37

Reset the unit

In the case you need to reset the unit without the web interface, the GigaCore range of Ethernet switch offer different 
levels of reset, based on the ones you can find through the web interface. 

 

■

Reset

: The unit is brought back to its default configuration, with the default IP address printed at the back of the unit. 

Profiles stored in the unit are preserved. 

Default login: admin 

Password: No password

 

■

Reload Default

: Profile stored in slot 1 is reloaded.  The “Reload Default” is available only if the profile stored in slot 1 

has been locked through the utility menu (see “Default Profile” on page 26). If this profile is set with a password, the 

user will need to enter it through the web interface to access the switch’s menus.  

Default login: admin 

Password: The one set for the profile (if there is one)

 

■

Factory Reset

:  Unit is fully reset, profiles stored in the unit are deleted. 

Default login: admin 

Password: No password

Condition 1: Unit is currently running
Condition 2: There is no profile set as default profile (see “Default Profile” on page 26). 

Hold the reset button at the rear of the unit for at least five seconds to see the four status’ LEDs blinking red. Releasing 
the reset button while the LEDs are blinking red will reset the unit. 
Be aware that releasing the reset button during the first 5seconds before LEDS blink red will cancel operation.  
Be aware that releasing the reset button during the 5seconds after LEDS blink red will cancel operation.

Hold the

 reset button

Release the button =

Reset

Release the button =

Cancel

5s

Timing

Function

5s

5s

RED Blink

Reset

THE FOLLOWING RESET PROCEDURES CAN BE ALSO BE ACHIEVED WITH THE FRONT END PANEL’S 

JOG (GIGACORE 16XT AND 16RFO ONLY)

Содержание GigaCore 12











































Отзывы:

Нет отзывов