Luminex Ethernet - DMX8 / WiFi, Руководство пользователя

Страница: 46 / 54

Using a fixed channel is better suited for a reliable connection between 2
Ethernet DMX8/W. However, it can be sometimes very useful to be able to
change the channel number on the fly for your whole network, so the
Ethernet DMX8/W or Ethernet DMX2/W used as access point will be set up
with a static channel, and the client ones with an auto-assigned one
(Auto).
Also, use the auto channel mode can let the node select the best
frequency to use to avoid interferences. When the Node 8/W is set as a
client, you'll not be able to change the frequency neither the channel, as it
will scan automatically for the frequency used by the access point sharing
the same SSID.
Antenna : Select the antenna or connector you wish to use : select
SMA/N-Type if you want to use the front end connector of your node 8/W
Security Policy :
None – No security Policy.
WPA-PSK Encryption
: Use WPA-PSK (Wi-Fi Protected Access with Pre-
Shared Key) to obtain a better security policy. Luminex as already entered
a default passphrase to use with this encryption. This value is viewable on
the status page. WPA-PSK is the default policy. Luminex use a WPA-PSK
TKIP encryption.
Once done, click on the “
Submit ” button.
Site Survey
It can be sometimes very useful to scan a wireless network if you don't
remember what SSID you've set earlier in the access point you want to
connect to. If you've set one of your wireless devices as a client, reach the
“wireless” web page and click on the “Site Survey” hyperlink.
Page 46 of 54 Ethernet - DMX8 / WiFi