Luminex Ethernet - DMX8 / WiFi, Руководство пользователя

Страница: 27 / 54

●
Merging Policies :
The Ethernet-DMX 8 firmware offers enhanced merging policies that fits
to all kind of setup, even the most complex one !
4 available merging policies can be applied on your DMX network, in 2
main setup categories :
Local merging : 2 different DMX streams are merged on the same
physical device (Node). The merging policy will be mainly set on Inputs.
IP Merging : This special feature allows you to merge 2 different DMX or
Artnet streams through the network. The merging policy will be mainly
applied on the Output, except for IP backup.
Available policies :
–
HTP : Highest Take Precedence; Commonly used to merge dimmer
channels
–
LTP : Latest Take Precedence; Better suited when using moving lights
–
Backup : set one of the 2 outlets as a backup input
–
Custom : This is the most complete and efficient policy. This mode
offers you to choose what policy to apply for each channel of each
universe, and also to create a complete custom soft patch. By more,
the merging policy can be remotely triggered by DMX.
The available policies differs if you use either inputs or outputs :
Inputs (Local mode)
Direction Universe Mode
Outlet 1 Input 0(00) Merge
Outlet 2 Input Ch1 HTP, LTP, Backup, Custom
In this example, the selected mode is “ Merge ”. The second outlet will
automatically be set as a merged input. You will not be able to configure a
universe address for the second outlet, as the merged result will end at
the universe address of the first outlet (primary input). Instead of
Ethernet - DMX8 / WiFi Page 27 of 54
Illustration 1: Local DMX merging