5
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: 52-CL
FLOOR
AT LEAST
7'
CEILING
Figure 1
HOOK
MOUNTING
PLATE
FAN MOTOR
HOUSING
MOTOR
BRACKET
SUPPLY
WIRES
Figure 3
3. How to Hang Your Ceiling Fan
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as “Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less”.
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable
for Fan Support of 22.7 kg. (50 lbs.) or less”, and
use screws supplied with outlet box. Most outlet
boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor (Figure 1).
CAUTION
!
MOUNTING
PLATE
LEVELING WASHERS
(if required)
OUTLET BOX
MOUNTING SCREWS (2)
(supplied with outlet box)
Figure 2
3.1
Securely attach the Mounting Plate to the Outlet Box
(Figure 2) using Two Screws (supplied with outlet box) .
NOTE: For better fan performance make sure
the mounting plate is level. Additional washers
(not included) may be needed to insert between the
electrical box and mounting plate (Figure 2).
3.2
Pull the Black, White and Ground Wires out of the
Outlet Box through the Hole in the Mounting Plate and
lay them to the side as shown in Figure 3 .
Carefully lift the Fan Motor Assembly and engage the
Slot in the Motor Bracket with the Hook on the Mounting
Plate so that it is securely suspended (Figure 3) .
Then connect wiring to your Fan according to Section
“4 . HOW TO WIRE YOUR CEILING FAN” .
