Luminance Brands kathy ireland HOME Summerhaven LED CF850GES01, Руководство пользователя

Страница: 8 / 24

8
U.L. Model No.: CF850
CEILING
COVER
HANGER BALL
HANGER BALL PIN
HANGER BALL
GROOVE
DOWNROD
SET SCREW
Figure 9
3.9
Route the Two 80” Motor Leads through the Hanger
Ball .
Reinstall the Hanger Ball (Figure 9) on the Downrod as
follows:
Position the Hanger Ball Pin through the two Holes in
the Downrod and align the Ball so the Pin is captured in
the Groove in the top of the Hanger Ball .
Pull the Hanger Ball up tight against the Pin and
securely tighten the Set Screw in the Hanger Ball .
NOTE: A loose set screw could create fan wobble.
It is critical that the pin in the hanger ball is properly
installed and the set screw securely tightened. Failure
to verify that the pin and set screw are properly
installed could result in the fan falling.
WARNING
!
3. Ceiling Fan Assembly
(continued)
BLACK WIRE
6 TO 9
INCHES
BLUE WIRE
WHITE WIRE
HANGER BALL
1/2
INCH
3.10
The Fan comes with Black, Blue and White Wires that
are 80-inches long .
Before installing the Fan, measure up approximately
6 to 9-inches above top of Hanger Ball/Downrod
Assembly (Figure 10) .
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires .
Figure 10