7
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF742PF
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 6
3.7
Carefully turn the partially assembled Ceiling Fan over and
place it on the styrofoam for Blades Assembly (Figure 6).
3.8
Remove the Shipping Spacers and the Spacer Attachment
Screws from the Motor before installation of Blade Assemblies
(Figure 7).
Discard the Spacers and Spacer Screws.
SPACER ATTACHMENT SCREW
SHIPPING SPACER
Figure 7
3. Ceiling Fan Assembly
(Continued)
BLACK WIRE
6 TO 9
INCHES
WHITE WIRE
HANGER BALL
1/2
INCH
BLUE WIRE
3.6
The Fan comes with Blue, Black and White Wires that are
80” long.
Measure up approximately 6 to 9-inches above top of Hanger
Ball/3.5” Downrod Assembly (Figure 5).
Cut off excess Wires and strip back insulation 1/2-inch from
end of Wires.
Figure 5
