10
After Sales Support
Telephone:
1300 886 649
Instructions (Cont.)
Steam ironing
1. Place the iron steam station on a flat, firm and stable surface.
2. Fill the water tank with tap water according to the instructions on page 8.
3. Unwind and straighten the power cord, then plug the steam station into a
suitable power point and switch on the power at the outlet. All LED lights
turn on for a second with an audible beep sound, then they turn off to
indicate the unit is turned on.
4. Press the selection button (repeatedly) to choose your required steam level:
maximum steam, medium steam, low steam, no steam. The relevant steam
level indicator will glow red and the power indicator will blink to indicate the
appliance is preheating.
5. Turn the temperature dial on the iron in a clockwise direction to your desired
temperature (see page 7 for an explanation of the dot symbols). The pilot
light will glow until the required iron temperature is reached.
6. When the iron has reached the set temperature, the pilot light on the iron
goes off and the red power indicator on the steam station will stop blinking
and change to green, followed by a beep sound. The appliance is now ready
for use.
7. Press the steam button/steam lock for steam ironing (see page 9 for details).
8. To switch off the iron, turn the temperature dial on the iron in a counter-
clockwise direction to the MIN position.
9. To switch off the steam station, press and hold the selection button for two
seconds, the steam station will beep and switch to standby mode and the
indicator light will change to red.
10. Unplug the unit from the power outlet.
11. When the appliance has cooled down completely, empty the water tank (see
page 12 for instructions) and store the unit in a safe place.
