Client:
ALDI AU (OPT)
Project:
SK1305
Language:
EN
Date:
11.01.2008
Version:
05
Page: 9 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
9
Before first use
Remove any adhesive labels and wipe the outside of the kettle with
a damp cloth.
Rinse the inside of the kettle and fill it with cold water, boil and
then empty the kettle. Repeat this procedure a couple of times to
clean the kettle of any remaining residue from the manufacturing
process.
Using the kettle
Remove the kettle (9) from its base (7) before you start filling it
with water. Be careful not to spill water onto the connector (6).
Fill the kettle (9) through the open lid (2) with water. Only fill
water between the MIN and MAX levels on the water level indicator
(4).
Close the kettle (9) with the lid (2).
Place the kettle (9) on the base (7) and press down the on/off switch
(5) to start boiling the water. The indicator light (5) lights up.
The kettle (9) cannot be switched on if it is not properly situated
on the base (7).
After the water is boiled, the on/off switch (5) will automatically
turn to the 0 position and the indicator light (5) will go off.
Do not try to alter or remove the boil dry protection (3).
Carefully pour the hot water into your cup, pot, or teapot.
You can switch off the kettle (9) manually by softly lifting up the
on/off switch (5).
After each use, empty the kettle (9) completely and disconnect it
from the main power supply.
Always fill with water before using the kettle (9). Do not use without
water. The kettle (9) is equipped with boil-dry protection (3) and
will automatically shut down, if there is no water inside.
•
•
•
•
•
•
•
•
•
•
•
•
•
OPERATION GUIDE
