Lumina Power CCPF-3500 Series Скачать руководство пользователя страница 14

 

02100004  Rev 1 

CCPF-3500-XX User Manual 

Page 14 of 15 

 

8.

 

Product Limited Warranty 

Lumina  Power,  Inc.,  as  Seller,  warrants  that  each  Product  sold  by  it  is  free  of  defects  in  materials  and 
workmanship. Duration of warranty is as follows:  

a. All Chassis enclosed products are covered for twenty four (24) months from date of shipment. Products 
included but are not limited to the  following product families:  CCPF, CCHP, LDY,  LDYHC,  LDQCW, 
XLB (excluding XLB-300), and MLB. Custom fully enclosed products may be covered for the same 24 
months. Please consult factory for specific terms.  

b. All Open Frame products are covered for 12 months from date of shipment. Open frame power supplies 
are defined as any product that is not enclosed in a metal or plastic enclosure. Products included but are not 
limited to the following product families: LDPC, LDQPC, XLB-300 and any open frame custom products.  

c.  All  products  returned  for  repair  are  covered  for  a  period  of  6  month  or  the  balance  of  the  original 
warranty, whichever is longer.  

Warranty  is  not  transferable  to  parties  outside  of  original  Buyer's  corporate  or  educational  organization. 
Seller will have sole discretion in making determination of validity of warranty if the Product is transferred 
to a different user group than the original Buyer.  

Normal wear and tear and items expendable in normal use are not covered by this warranty. All warranty 
repair or replacement of parts shall be limited to Product malfunctions, which, in the sole opinion of Seller, 
are due or traceable to defects in original materials or workmanship. Such determination will be made when 
the  Product  is  returned  to  the  Seller's  factory,  transportation  prepaid  by  the  Buyer,  within  the  warranty 
period.  

All  obligations  under  this  warranty  shall  cease  immediately  in  the  event  of  abuse,  accident,  alteration, 
misuse, or neglect of the Product. Use and service of the Product in a manner not in accordance with the 
Owner's Manual (if furnished) will likewise cause all obligations under this warranty to cease. Repaired or 
replacement parts are warranted only for the remaining unexpired portion of the original warranty period 
for  the  Product.  After  expiration  of  the  applicable  warranty  period,  Buyer  shall  be  charged  at  the  then 
current prices for parts, labor and transportation.  

Seller  has  no  responsibility  under  this  warranty  for  the  cost  of  any  work  (material,  labor,  and/or  other 
expenses) performed by or incurred by Buyer or any third party for modification or repair of the Product 
unless specifically authorized in advance in writing by Seller.  

Reasonable care must be used to avoid hazards. Seller expressly disclaims responsibility for loss or damage 
caused by use of its Products other than in accordance with proper operation procedures.  Other than those 
expressly  stated herein, there are no other warranties of any kind, expressed or implied, and specifically 
included  but  not  by  way  of  limitation  are  the  implied  warranties  of  fitness  or  merchantability  for  a 
particular purpose.  

It  is  understood  and  agreed  the  seller’s  liability  whether  in  contract,  in  tort,  under  any  warranty,  in 
negligence  or  otherwise  shall  not  exceed  the  return  of  the  amount  of  the  purchase  price  paid  by  the 
purchaser and under no circumstance shall seller be liable for special, indirect, incidental or consequential 
damages.  The  price  stated  for  the  product  is  a  consideration  in  limiting  seller's  liability.  No  action, 
regardless of form, arising out of the transactions of this agreement may be brought by purchaser more than 
one year after the cause of action has accrued.  

Seller’s maximum liability shall not exceed and buyer's remedy is limited to either (i) repair or replacement 
of the defective part of product, or at seller's option (ii) return of the product and refund of the purchase 
price, and such remedy shall be the buyer's entire and exclusive remedy.

 

Содержание CCPF-3500 Series
















Отзывы: