3
Getting started
The best position for Bodyclock Elite is by your bedside.
!
Screw in the bulb firmly and fit the glass bulb cover.
!
Hook one of the clips over the inside of the bulb cover. Make sure
the other clip is tucked inside as you lower the bulb cover onto the
base.
!
Plug in, switch on at the mains and you’re ready for
Basic set-up
.
www.lumie.com
|
5
English
2
Important!
!
Do not use Bodyclock Elite if the lamp cover is broken, damaged or
missing. If you need to remove the lamp cover, unplug the unit first
and let it cool down.
!
The lamp cover gets warm when the light is on so keep the unit
clear of anything that may be damaged by heat. Take care that you
don’t accidentally cover the unit with your bedding!
!
Do not open the base – there are no user-serviceable parts inside.
!
For indoor use only. Keep away from water and damp.
!
Clean only with a dry or lightly moistened cloth.
!
Always use the correct bulb (maximum 42W E14 halogen bulb).
Replacements are available from Lumie.
!
It’s possible there may be some interference between this product
and other electronic products close by, notably mobile phones.
Usually this is in the form of audible noise and all you need do is
move them apart.
!
Keep the cable away from heated surfaces.
!
At the end of its life, do not throw the unit out with normal
domestic waste. Please take it to an official recycling point
to be disposed of responsibly.
4
|
www.lumie.com
English
1
2
3
A
P
P
S
4
1
2
3
4
A
LAMP
S
Speaker
Display
Clip
Bulb
Glass bulb cover
Speaker
Slot for SD card
Mains
FM aerial
Audio input
(e.g. MP3 player)
Audio output
(e.g. headphones)
