14
Adjusting the brightness of the clock
display
The
DISPLAY AUTO
mode automatically dims the display at
sleep time (when the light is at a low level and the wake-up or
sunset sequences are set).
¾
To set the display to remain bright, then…
¾
A
must be OFF (button depressed).
¾
Press
P
until the program message
DISPLAY AUTO
appears.
¾
Immediately press
+
or
–
until
DISPLAY HIGH
is set.
¾
Press
P
to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
15
Setting Sleepsound
(white noise)
Sleepsound is a continuous white noise 'hiss' sound that is useful to
mask outside noises when you want to sleep.
¾
Make sure
A
is OFF (button depressed).
¾
Press
P
repeatedly until program message
SOUND OFF
appears.
¾
Immediately press
+
or
–
until
SOUND AUTO
appears.This
means the Sleepsound will become quieter with the sunset, falling
silent as the light goes out.
¾
Alternatively press
+
or
–
until
SOUND PERM
(sound
permanent) appears.This means whenever you turn the wake-up
on (
A
ON, button elevated), the Sleepsound will be heard.The
#
symbol on the display shows when Sleepsound is enabled.
¾
To turn the Sleepsound off for just one night …while the hiss sound
is audible, press
A
IN and immediately OUT again.
www.lumie.com
|
lumie careline 0845 658 9292
|
9
English
BCAI0708 14/8/07 18:25 Page 9
