Water tight IP68 connectors
REV. 15/04/2019
x 2
REQUIRED FOR SKU # 9010
INNOVALITE SOLAR POWERED LIGHT # 9010
WARNING
TABLE OF CONTENTS
OOLS REQUIRED (Not Included)
COMPATIBLE WITH ANY INNOVAPLAS STEP
CONTAINING THE INNOVAPLAS CREST ROUNDEL
90 days on manufacturing defects.
Replacement only.
Risk of drowning by entangle-
ment; secure the power cord
with tie wrap supplied as per
instructions.
A) Light installation on the step
B) Deck installation
C) Step combo Installation
D) User guide
E) Winterizing
T
*
For Biltmor and Aquarius only.
LIMITED WARRANTY
CAUTION
The lighting fixture may be damaged if subjected to freezing weather.
Remove the entire step assembly from the pool and allow all water to
drain from the step and dry before storing.
Store in a dry location unexposed to winter conditions.
Do not submerge the solar panel the product could be damaged.
A
Pool step
Treaded ring
2) Insert the lighting fixture from the outside of the step.
3) Fasten the treaded ring and align the fixture properly in the step before tightening.
Tighten the ring moderately.
IMPORTANT: Use supplied tie wraps to attach electric cord to a post as
shown. Do not submerge the connector the product could
be damaged.
LIGHT INSTALLATION ON THE STEP
1) Remove the Innovaplas round cap from the step by compressing 2 tabs at the back.
For the Biltmor or Aquarius step cut the 4 tabs with a utility knife to remove the blank
cap.
Utility knife
For Biltmor
or Aquarius
step.