English
-
6
Chapter 4 Start Using
Please adjust to the local voltage frequency of 50/60 Hz. For the
frequency in actual use, please refer to
Appendix 1 power frequency
for each country in the world
in the manual.
1. Remove the lens cap.
2. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
3. Pull up the lamp arm to a proper position.
4. Place an object to be displayed under the camera.
5. Press [POWER]
on the
remote control
or
control panel
to power on.
6. Press
control panel
[AUTO TUNE]
button to optimize the image.
You are ready to teach/present.
7. Each time the lens is moved, press [AUTO TUNE]
on the
remote
control
or
control panel
to refocus.
According to your request, you can adjust the camera head slightly to aim
at the center of the documents when the anchor of lens was reached.
When using the remote control, aim at the remote sensor on the PS753,
and press the power button.
Once PS753 is turned on, the LED on the control panel will flash a few times
and stay lit. Please contact your distributor if the LED does not light up.
