English
-
31
7.13 I would like to switch a part of the live image (PAN)
1. Press
[PAN]
on the
remote control
or
control panel
to switch the live
image to the upper-left / lower-left / upper-right / lower-right / full screen.
<Notes>
This function is not available under Microscope Mode. The
Zoom in / out function is not available when this function is activated.
7.14 I would like to play the slides (Slide Show)
7.14.1 Setting the slide show effect
1. Press
[Menu]
on the
remote control
or
control panel
to enter
the setting menu.
2. Press
[
f
]
or
[
e
]
to access the
[Storage]
menu.
3. Press
[
d
]
to find the
[Slide Show Effect].
4. Press
[
f
]
or
[
e
]
to select image switch mode between
[Off /
Shutter / Right / Down / Side / Open].
5. Press
[Menu]
to exit.
7.14.2 Setting delay time
1. Press
[Menu]
on the
remote control
or
control panel
to enter
the setting menu.
2. Press
[
f
]
or
[
e
]
to access the
[Storage]
menu.
3. Press
[
d
]
to find the
[Delay].
4. Press
[
f
]
or
[
e
]
to select image switch mode between
[1 Sec / 3
Sec / 5 Sec /
10 Sec / Manual].
5. Press
[Menu]
to exit.
7.14.3 Activating/Stopping the slide show
<Notes>Images over 8 MB, cannot be played. Whilst playing, the
[Rotate]
function can be activated to rotate the images.
Remote control:
1. Press
[Slide Show]
to start playing.
2. Press
[Slide Show]
again to stop playing.
Control panel:
1. Press
[Menu]
to enter the setting menu.
2. Press
[
f
]
or
[
e
]
to access the
[Storage]
menu.
