4.2 Mounting the DC265 at desktop
1. Please set up the DIP Switch settings first. Refer to
Chapter 5 “DIP
Switch Settings”
in the DC265 user manual.
2. Please refer to the
Base Installation Guide
for installation instructions
for all parts.
4.3 Connecting devices
4.3.1 Step 1: Plugging in the power outlet
<Note>
Appearance of power cord may vary with countries/regions.
4.3.2 Step 2: Connecting with components
AC Outlet
¾
Connecting to a projector
z
Connect the VGA OUT
on the DC265 to the
VGA IN
on the projector
using the VGA cable.
¾
Connecting to a monitor
z
Use VGA cable to connect VGA PASSTHROUGH connector on DC265
to the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH
connector only outputs VGA IN
signals.
English
-
13
