English
-
34
Chapter 9 Connecting to a Microscope
1 Mount the
microscope adaptor
in the accessories pack onto the microscope
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28mm, Ø 31mm,
Ø 33mm, and Ø 34mm.
2 Connect the lens of the DC166 with the
microscope adaptor
.
3 Select the Microscope
mode
3.1. From the
control panel
or
remote control
3.1.1. Press [MENU] to enter the on-screen menu.
3.1.2. Press [
] or [
] to select [Display].
3.1.3. Press [
] to select among [Mode] modes.
3.1.4. Press [
] or [
] to select [Microscope].
4 If the image is fuzzy:
4.1. Adjust the focus of microscope.
4.2. Press the [FOCUS] button on either side of the DC166 lens to activate
the auto focus.
For eyepieces of about
Ø 33mm
,
Ø 34mm
, only a microscope adaptor
printed with
Lumens
should be
installed.
For eyepieces of about
Ø 28mm
or
Ø 31mm
,
please install two microscope adaptors (
1.
printed with
Lumens 2.
using the applicable
microscope adaptor depending on eyepieces
of about
Ø 28mm
or
Ø 31mm
.)
