CU003 User Manual
Lumens
16
Error Message
Off
1 Enable or disable error
messages of fan and lamp
failures
2 If both fan and lamp failed then
display the whole row
concurrently
3 After other OSD screens
disappear, the PROMPT displays
until timeout.
4. If the situation persists the
display time of PROMPT will be
re-defined.
5. The ON status of LAMP will
timeout in 10 minutes.
6.
In case the Error Message
option is set to OFF the 7-notch
display of the Control Unit stops
showing Error Message at the
same time. So does the Panel
10/11 with System Error.
ON
Language
Chinese
English
Dynamic Mode
Off
Enable Dynamic Mode
ON
Ethernet Setting
Open the Ethernet Setting option
This option is dimmed if the
network function is disabled. It is
selectable only when the network
function is active.
IP address
192.168.128.128
You may use the left- and
right-arrow key to adjust value or
type desired value with the
numeric keypad. Press Enter to
confirm your input value.
Subnet Mask
XXX.XXX.XXX.X
XX
You may use the left- and
right-arrow key to adjust value or
type desired value with the
numeric keypad. Press Enter to
confirm your input value.
Geteway
XXX.XXX.XXX.X
XX
You may use the left- and
right-arrow key to adjust value or
type desired value with the
numeric keypad. Press Enter to
confirm your input value.
Apply
Thermal (LED:
LE913/LE923/L
E933)
DMD Fan
The system is turned off or the
Error Message is prompted in
case of DMD Fan failure.
PWR Fan
The system is turned off or the
Error Message is prompted in
case of PWR Fan failure.
HP Fan
The system is turned off or the
Error Message is prompted in
case of Heat Pipe Fan failure.
DMD Temp
DMD Temp
ENV Temp
Environment Temp
