CU003 User Manual
Lumens
15
(LED)
Manual
the TI CCA auto color
temperature control function
The Off option disables the TI
CCA function and return the LED
back to its original color.
Auto
iSystem Mode
(Laser)
Off
1. Auto option checks the change
of each engine’s brightness every
10 minutes; when the change is
more than 5%, it runs the
brightness balance function
(iSystem Balance must be
performed previously)
2. When
Intelligent mode
is set
to
Auto/Manual
,
Projector mode
can only be set to
Normal or
Economic mode
. However,
Brightness
cannot be selected
3.
This function is available only
to engines with the intelligent
system
Manual
Auto
Calibrating
Value
Default
1. Selected calibrating values
come into effect only after running
the “iSystem Balance” software
manually.
(For LED series, please restart
the device to activate the
settings).
2. Default — use the factory
calibrating values of CL200
directly if no HOST is connected.
3. This option is dimmed and
cannot be selected in case the
iSystem is set to Off. This option
is valid only in Auto or Manual
mode.
On Screen
Online Cube
List
（
LED/
Laser
）
NA
For LED series
Display status of connected Cube
Brightness: Display brightness
differences between connected
Cube
Target: Enable target values of
iSystem function
For Laser series
Show connected "Cube ID"
Advanced —Misc
Item
Value/Selection Description
IndexDly /
Phosphor
IndexDly
0~719
(Display Misc and OSD items
described above)
Logo
Off
Enable or disable power on Logo
On
Logo Time out
30
Elapse time of power-on Logo
45
60
