Quick Start Taranis X9D Plus
1) Ensure all switches on top of the radio (Switch A, B, C,D) are switched to the
furthest position from you. And all switches at the front of the radio (switches
E,F,G,H) are in the far down position.
2) Turn on radio using the ON/Off switch.
3) Select the required mode you wish to fly in using switch H. Up towards the sky
is Acro mode, middle position is Horizon and down position is angle mode.
Place drone on a flat surface and install the battery securely with battery straps then
plug the battery into the drone and ensure all cables and leads are clear of the
propellers. Your should hear some initialisation beeps.
To arm the drone ready to fly:
1) Ensure the throttle is at zero or in the furthest down position. (The drone will
not arm if the throttle is not at zero position.
2) Move switch F in the up position to disable the safety mode.
3) Then to Arm the quad, move switch H to the up position momentarily. The
motors will begin to spin indicating the drone will now begin to respond to the
main radio controls.
After flight or directly after a crash, disarm your drone immediately by moving switch
F back into the down position.
10
Содержание Hydra Edition QAV210
Страница 1: ......
Страница 5: ...Radio Controls 1 On Off Switch 2 Yaw 3 Throttle 4 Roll 5 Pitch F Arm Safety switch 4...
Страница 15: ...TBS Unify Pro Frequency Chart 14...